ULMA Formwork & Shoring

Used ULMA brand Wall Forms, Slab Formwork, Column Formwork, and Props

Wall Formwork: Includes modular panel systems such as ORMA and MEGALITE for walls, foundations, and columns. Suitable for handset or crane-set applications, with robust frames designed for high concrete pressures and architectural finishes.

Slab Formwork: Versatile solutions including panel and beam systems engineered for both simple and complex floor geometries, with efficient assembly and early stripping options.

Column Formwork: Covers standard and special geometries using modular panels and specialized systems for efficient high-rise and commercial construction.

Props/Post Shores: ULMA Aluprops are lightweight, high-capacity aluminum props designed for use as individual shores or combined with bracing frames to form towers. Easy height adjustment, high load capacity, and long service life make them ideal for slab shoring and re-shoring. Steel push-pull props are also available for alignment and support of wall gangs.

Used ULMA brand Shoring and Forming Materials AVAILABLE

ulma tables.jpg

Used ULMA Tables Now Available!

Large quantity of used ULMA Flying Table Formwork now available.

Ideal for high-rise and multi-level slab construction.

All tables are in good used condition.

Freight Manager is on staff who will provide you with a freight rate delivered to your door.

Please reach our Sales Department for details.

888-322-6323

more
aluprops ulma (1).jpg

ULMA ALUPROP 3.3-4.8 Now Available

Lightweight, high-capacity aluminum post shore designed for slab formwork shoring and reshoring.

Key Specifications

  • Usage Length (Min – Max): 3.3 m to 4.8 m (approx. 10′ 10″ to 15′ 9″)
  • At min. length (3.3 m): 15.7 kips (69.8 kN)
  • At max. length (4.8 m): 10.1 kips (44.9 kN)

ULMA ALUPROP 2.2-3.7 Now Available

Lightweight, high-capacity aluminum post shore designed for slab formwork shoring and reshoring.

Key Specifications

  • Usage Length (Min – Max): 2.2 m to 3.7 m (approx. 7′ 2 ½″ to 12′ 1 ½″)
  • Fully Retracted (2.2 m / 7′ 2 ½″): 20.7 kips (92.0 kN)
  • Fully Extended (3.7 m / 12′ 1 ½″): 13.8 kips (61.3 kN)

ULMA ALUPROP 1m Extension Now Available

(also referred to as the 1m Supplement or 3′ 3″ Extension)

Accessory component designed to add fixed height to standard ALUPROP aluminum post shores.

Key Specifications

  • Extension Length: Fixed 1.0 m (approx. 3′ 3″)
  • Maximum Height Extension: Increases the maximum height ceiling of a single post shore from 6.0 m (19′ 8″) up to 7.0 m (22′ 11″)
more
ulma1.jpg

Used ULMA ORMA Wall Forms Now Available!

Approximately 13,100 square feet of ULMA ORMA modular steel panel formwork, including a strong mix of full-height panels, fillers, and corners. Ideal for walls, columns, and vertical concrete structures.

High-capacity modular formwork with excellent concrete finish.

All panels feature robust galvanized steel frames with high-quality phenolic birch plywood faces. System is in good used condition. Contact our sales team for details, pricing, or to reserve.

888-322-6323

more
PP.jpeg

Used ULMA Push-Pull Props Now Available!

A solid inventory of 186 ULMA Push-Pull Props in four common sizes. Ideal for bracing, aligning, and stabilizing wall formwork during concrete placement.

These adjustable steel props are designed to take both compressive (push) and tensile (pull) loads, making them essential for plumbing and securing vertical formwork against wind and concrete pressure.

All props are in good used condition. Contact our sales team for details and pricing.

888-322-6323

more