aluprops ulma (1).jpg

Used ULMA Aluprops

ULMA ALUPROP 3.3-4.8 Now Available

Lightweight, high-capacity aluminum post shore designed for slab formwork shoring and reshoring.

Key Specifications

  • Usage Length (Min – Max): 3.3 m to 4.8 m (approx. 10′ 10″ to 15′ 9″)
  • At min. length (3.3 m): 15.7 kips (69.8 kN)
  • At max. length (4.8 m): 10.1 kips (44.9 kN)

ULMA ALUPROP 2.2-3.7 Now Available

Lightweight, high-capacity aluminum post shore designed for slab formwork shoring and reshoring.

Key Specifications

  • Usage Length (Min – Max): 2.2 m to 3.7 m (approx. 7′ 2 ½″ to 12′ 1 ½″)
  • Fully Retracted (2.2 m / 7′ 2 ½″): 20.7 kips (92.0 kN)
  • Fully Extended (3.7 m / 12′ 1 ½″): 13.8 kips (61.3 kN)

ULMA ALUPROP 1m Extension Now Available

(also referred to as the 1m Supplement or 3′ 3″ Extension)

Accessory component designed to add fixed height to standard ALUPROP aluminum post shores.

Key Specifications

  • Extension Length: Fixed 1.0 m (approx. 3′ 3″)
  • Maximum Height Extension: Increases the maximum height ceiling of a single post shore from 6.0 m (19′ 8″) up to 7.0 m (22′ 11″)

Aluminum Prop ALUPROP - ULMA Construction Call For Details 888-322-6323

Used ULMA Aluprops are adjustable aluminum post shores used to support slab formwork, beams, and temporary loads during concrete construction.

Core Purpose

ULMA Aluprops provide vertical shoring for concrete work, holding formwork in place while concrete is poured and cured. Their high load capacity and adjustable height make them suitable for many structural support tasks.

Typical Construction Uses

  • Slab formwork shoring — Supports horizontal formwork for cast‑in‑place concrete slabs.

  • Beam and garage deck support — Common in parking structures and multi‑level buildings.

  • Drophead slab systems — Their light weight and quick adjustment help speed up forming and stripping cycles.

  • Panelized slab shoring — Works well for large, repetitive slab layouts.

  • Joist slab shoring — Adjustable for irregular geometries and taller heights.

  • Flying tableforms — Strong enough to support large tableform systems.

  • General temporary propping — Often reused for miscellaneous structural support needs.

Tower and Height Configurations

  • Shoring towers — Multiple props can be braced together to reach tall heights.

  • Prop‑on‑prop stacking — Additional height can be achieved using clamps or bolts.

  • Common height ranges — Typically available from about 1.65 m up to 6 m, depending on the model.

Why Contractors Buy Them Used

  • Durability — Aluminum construction and robust hardware make them long‑lasting.

  • Lightweight handling — Easy to carry, position, and adjust on site.

  • High load capacity — Often rated up to 100 kN or more.

  • Versatility — Suitable for residential, commercial, and civil engineering projects.

Summary

Used ULMA Aluprops remain valuable because they offer strong, adjustable, lightweight shoring for a wide range of concrete construction tasks—from simple slab support to tall tower shoring setups.