Used Formwork
Used Formwork For Sale
Handset Forms We Buy and Sell
- EFCO HAND-E-FORM, all-steel handset system, lightweight panels and a simple wedge-bolt design that allows a single worker to easily set and strip forms.
- Doka Frami Xlife, framed wall formwork with lightweight panels designed for exceptionally fast assembly by hand without a crane.
- PERI DUO, lightweight, 100% recyclable polymer-composite handset system, components weigh no more than 55 lbs, requiring very few ties.
- Symons Steel-Ply, (Symons forms) modular system consisting of a steel frame and plywood face, utilizes standard wedge bolts and snap ties for maximum versatility.
- ULMA Construction MEGALITE, modular, lightweight aluminum system specifically designed to handle vertical concrete shaping for buildings and foundations.
- Aluma Systems Lite Form, highly versatile, lightweight clamp-connected handset panel system designed with hot-dip galvanized steel frames and plastic-faced plywood.
- MEVA MevaLite, all-plastic alkus-faced, aluminum-framed handset formwork system that connects seamlessly using a tool-free assembly lock.
- Dayton Superior Flex-Form, heavy-duty, all-steel forming system designed with flexible panels that easily adjust to specific radii for pouring curved concrete walls and circular structures.
Gang Forms & Walers we buy and sale
- EFCO PLATE GIRDER, An all-steel crane-set system that acts as its own self-spanning beam, eliminating the need for independent walers or aligners while delivering massive gang configurations.
- Aluma Systems Aluma Gang, A highly productive framing setup combining lightweight structural aluminum beams and heavy steel walers to maximize single crane lifts.
- Symons (Dayton Superior) Max-A-Ply, A specialized hybrid system matching a tough steel frame with an architectural high-density overlay plywood face for flawless, blemish-free concrete aesthetics.
- PERI TRIO, A widely utilized, crane-dependent framed system that integrates seamlessly with continuous horizontal walers and alignment couplers for perfectly flush gang joints.
- Doka Framax Xlife, A high-performing framed system paired with heavy-duty steel multi-purpose walers to form expansive, crane-lifted wall assemblies with fewer tie points.
- Symons Max-A-Form, A rigid, heavy-duty all-steel gang system engineered with built-in waler capability that is rated to handle up to 1,500 pounds per square foot of concrete pressure.
- PERI MAXIMO, A heavy-duty, large-panel gang system featuring a specialized steel structure and single-sided MX tie technology to speed up crane cycling and minimize labor.
- Doka Large-area formwork Top 50, A highly customizable timber-beam and steel-waler gang system that can be assembled to fit any structural shape, size, tie-pattern, or concrete pressure requirement.
- EFCO PLATE GIRDER, An all-steel crane-set system that acts as its own self-spanning beam, eliminating the need for independent walers or aligners while delivering massive gang configurations.
- Aluma Systems 7.5" Aluminum Strongback, A lightweight, high-strength structural channel used in back-to-back pairs with tie plates to align crane-set gang forms and support immense vertical concrete pour pressures.
- Dayton Superior Versiform Steel Channel Waler, Heavy-duty double 5-inch and 8-inch steel channels positioned back-to-back with structural gussets that reinforce large crane-lifted gangs against extreme hydrostatic concrete pressures.
Clamp Form Systems we buy and sale
- Aluma Systems Lite Form™ Handset Clamp System, Handset panels with mini and adjustable clamps, ideal for small panels or crane-lifted gangs.
- Doka Frami Xlife Clamp System, Lightweight panels assembled by hand using only a few clamps and ties per panel for efficient forming.
- EFCO HAND-E-FORM® System, Lightweight, all-steel panels that allow one worker to lift and set them quickly with convenient clamp assembly.
- Harris 1500 Clamp System, A heavy-duty, 1,500 PSF rated hand-set system featuring an open-tie design and symmetrical panels for fast, multidirectional wall building.
- Symons Rapid Clamp™ (ALISPLY) High-strength, tool-free clamp forming system compatible with large panels for faster gang forming.
- ULMA ORMA, A heavy-duty, metric panel system designed to withstand high concrete pressures, utilizing quick-acting hammer clamps to join, align, and stiffen large gangs.
- Hunnebeck MANTO, A heavy-duty steel frame system engineered for large-area pours up to 80 kN/m², Wedge Clamps lock panels flush without requiring extra bracing.
- PERI Trio, A universal, heavy-duty modular panel system requiring only a single component—the BFD Alignment Coupler—to simultaneously flush-align, connect, and tighten panels with one strike of a hammer
- Hunnebeck RASTO, A crane-independent 12 cm steel frame system that uses the quick-acting RASTO Aligning Clamp to create flush, tension-resistant panel connections.
TIE SYSTEMS
- 2,000 each Dayton D30 She Bolts
- 1-1/4” Coil Outer
- ¾” Coil Inner
- Wing Nut and Plate Washers
- 1" Batter Washers (2,000)
- 3/4" Batter Washers (500)
Steel Wall Forms
- EFCO Lite (13,100 sqft)
- 60-70 each 5’W x 4’L Max-A-Form STS Panels with a 24” x 18” Pour Door”
- EFCO Box Culvert Traveler
- SYMONS (GBS) Garage Beam System (1,000+ ft of 16"x24.25" beam, (120) 5'x5' frames, etc.)
- Max-A-Form (25,000 SqFt+) - some rental ready, some damaged
- Meva Mammut packate (30K+ sqft)
- Max-A-Form package 2- 5' x 12', 3- 5' x 8' and 66- 5' x 4' with a 24" x 18" pour door in each
- Max-A-Form various panels, filler angles, guard rail posts and more.
- 36" Circular Column forms 2', 4' & 6"
Contact for a list of wall formwork
Beams & Joists
- Peri MPB 24-420 (3) and MPB 24-600 (7) fob Wisconsin
- Titan Aluminum beam - 120, 160H, 160 and 225
- Harsco J-400 joists and stringers - 70K pieces of various sizes in many locations
- Aluma Style' 6.5" Joist - 5.4M, 4.8M, 4.2M, 3.2M, 2.4M, 1.8M
- 5.5" Aluminum Beam
- Quick Beam - Large quantities at good prices
- 6.5" deep Aluminum Joists
- Symons 7.5: deep x 5" flange Aluminum Beams
- 7.5" deep x 4" flange aluminum Stringers
- Aluminum Beam/Joists/Stringers
- SHORING SYSTEMS
- Hi-Load Shoring and crossbraces
- Meva MEP Props
- Tabla (must be imperial dimensions)
- Aluma Truss
- 12' or equivalent DeckFast (1,000 sqft)
- Peri MT625
- Shore X - 4' x 6' Frames, 4' x 5'4" ext. + accessories
- CLAMP SYSTEMS
- Radius Clamp system - Alsina, Logik 360
Props
- 180cm Brace Frames for 350 & 550 props
- PERI Multiprop, A high-capacity, lightweight aluminum prop that can also be connected with frames to create heavy-duty shoring towers.
- Hunnebeck DC 550 Floor props (700)
Shoring Systems - Modular & Drophead
Good Pricing on NEW HD Shoring Frames, Braces and Accessories
- DeckFast - bearing, edge support,sleeves, t-springs, tansverse beams, guard rail posts and more
- TITAN Formwork Systems TITAN HV, A handset, modular drophead system featuring interlocking aluminum beams that allow a two-person crew to rapidly frame slabs up to 20 inches thick
- Hi-Lite Shoring system - much more Joist/Stringer than frames and accessories
- Gass Shoring approx 100 legs and 300 frames and accessories
- New HD Stud Clamps selling at a discount
- Soldier Shore Jack (1,800)
- QB3 (100)
- Inner Tubes for #1, 2 and 3 HD Post Shores
- Aluma Beam, 4'x6' Hi-Load Frames and Jacks
- Patent Interform Truss
- 6' (60 pcs) and 12' (50 pcs) Soldier Beam/Super Stud
- B105 Cross Braces - (1000 pcs)
- Alu Mega Flex (NEW) and Ischebeck Titan - Beams, frames and legs
Tilt-Up Braces
- B-12 (32' fixed) or comparable (De Cristo)
- B1A (8'-14'), B4 (14'-6"-23'-6") and B5 (22'-6"-39')
- MISCELLANEOUS
- Hunnebeck Manto Gang System
- Used H20's Good shape
- Steel-Ply Form Cleaning Machine
- (1 or 2) 4-speed manual hydraulic hi-lift jacks for Flying Truss System
Other Concrete Equipment
- (140) new 10" x 10' 3 pocket Street Smart Curb Forms
- (75) new 12" x 10' 3 pocket Street Smart Curb Forms with Sliding Nose
- Used B-1 (7'6" to 8'10") Dayton Braces (8) in Dallas area
- Used UP-1 Tilt Up Brace (13 in Los Angeles) $50 each
- Used B-1 (7'6" to 8'10") Tilt Up Brace (8 in Toronto) $50 each
- Allenform holders (5000)
- Used C49 (1000)
- Used C89L 200 very, very clean
- Used B8 (125) B9 (181) B10 (162) 5ft ext.(443) and couplers (369)
- Used B-8's several locations
- Hunnebeck Manto Gang System
- Used H20's Good shape
- Steel-Ply Form Cleaning Machine
- (1 or 2) 4-speed manual hydraulic hi-lift jacks for Flying Truss System
Ready to Get Started?
Schedule a free estimate with us today!