DOKA Post Shore  (3).jpg

Doka Props

Used DOKA Props Eurex Adjustable Steel Post Shores

NOW Available, over 4,500 Used DOKA Props

  • 30-450 Doka floor prop Eurex 30 top 450
  • 30-400 Doka floor prop Eurex 30 top 400
  • 30-300 Doka floor prop Eurex 30 top 300
  • 30-550 Doka floor prop Eurex 30 top 550
  • 20-550 Doka floor prop Eurex 20 top 550

Large quantity of used Doka Eurex Floor Props in good job ready condition - Buy All Or Part. 888-322-6323

  • 30-550 DOKA Post Shores (7).jpg

Doka floor prop Eurex top

Doka Eurex props are heavy-duty, adjustable telescopic vertical supports primarily used on construction sites to support temporary concrete formwork, slab systems, and temporary structural loads. They act as high-capacity construction jacks (or shoring props) designed to safely transfer heavy vertical loads downward while concrete is poured and cured.

Primary Applications

  • Slab and Falsework Support: They serve as the primary vertical load-bearing posts directly beneath concrete slab systems (such as Dokaflex) and beam formwork.
  • Temporary Reshoring (Back-Propping): Once a formwork system is stripped from a newly poured floor, Eurex props are placed underneath to distribute the immense weight of the curing concrete safely down through lower structural levels.
  • High-Clearance & Heavy-Duty Shoring: Specialized series like the high-reach Eurex 20 top 700 or the ultra-strong aluminum Eurex 60 systems are utilized for high ceilings, commercial concrete structures, or multi-level bracing where standard props lack the height or strength capacity.

Key Features & Mechanical Advantages

Unlike standard generic "Acrow" style props, Doka's Eurex series introduces specific engineering and safety features:

  • Continuous High Load-Bearing Capacity: Standard steel models (like the Eurex 20 top and Eurex 30 top) strictly comply with EN 1065 structural regulations. Crucially, they maintain their baseline capacities (e.g., at least 20 kN for Eurex 20 or 30 kN for Eurex 30) at any extension height within their working range.
  • Special Thread Geometry: The unique thread layout prevents the adjusting collar from locking completely tightly under massive concrete pressure. This allows operators to strike or loosen the prop collar easily with a quick hammer blow when stripping formwork.
  • Numbered Pegging Holes: The inner telescopic tube features sequentially numbered holes so site crew can instantly pre-set all props to a uniform height without manually measuring each one.
  • Operator Safety Safeguards: They include a built-in 10 cm hand-trap protection gap to prevent the inner tube from slamming down and crushing fingers during teardown, as well as an anti-dropout latch that keeps the inner tube from sliding out accidentally.